Search results for "Carbon film"

Carbon Nanotubes: In-Situ Growth of Ultrathin Films of NiFe-LDHs: Towards a Hierarchical Synthesis of Bamboo-Like Carbon Nanotubes (Adv. Mater. Inter…

2014

Soft X-ray photoelectron microscopy used for the characterization of diamond, a-C and CN , thin films

2002

Abstract This article gives an overview about the application of X-ray photoemission electron microscopy (X-PEEM) used for the analysis of carbon thin films. We present the results of an X-ray absorption near edge structure (XANES) study of CVD diamond, a-C and CNx films on Si (100) as well as a defect analysis of a hard disc scratch test. The sp2/sp3 ratio of the carbon films was determined and mapped in the electron micrographs, which show localized defects in the surface.

In-Situ Growth of Ultrathin Films of NiFe-LDHs: Towards a Hierarchical Synthesis of Bamboo-Like Carbon Nanotubes

2014

The synthesis of ultrathin films (UTFs) of NiFe-LDHs has been achieved by means of an in situ hydrothermal approach, leading to a flat disposition of the LDH crystallites on the substrate, in clear contrast to the most common perpendicular orientation reported to date. Experimental factors like time of synthesis or the nature of the substrate, seem to play a crucial role during the growing process. The 2D morphology of the NiFe-LDH crystallites was kept after a calcination procedure, leading to a topotactic transformation into mixed-metal oxide platelets. Hereby, in order to study the catalytic behavior of our samples, a chemical vapor deposition process is explored upon the as-synthesized …

Low-temperature atomic layer deposition of ZnO thin films: Control of crystallinity and orientation

2011

Abstract Low-temperature atomic layer deposition (ALD) processes are intensely looked for to extend the usability of the technique to applications where sensitive substrates such as polymers or biological materials need to be coated by high-quality thin films. A preferred film orientation, on the other hand, is often required to enhance the desired film properties. Here we demonstrate that smooth, crystalline ZnO thin films can be deposited from diethylzinc and water by ALD even at room temperature. The depositions were carried out on Si(100) substrates in the temperature range from 23 to 140 °C. Highly c-axis-oriented films were realized at temperatures below ~ 80 °C. The film crystallinit…

Negative Staining and Cryo-negative Staining: Applications in Biology and Medicine

2013

Negative staining is widely applicable to isolated viruses, protein molecules, macromolecular assemblies and fibrils, subcellular membrane fractions, liposomes and artificial membranes, synthetic DNA arrays, and also to polymer solutions and a variety of nanotechnology samples. Techniques are provided for the preparation of the necessary support films (continuous carbon and holey/perforated carbon). The range of suitable negative stains is presented, with some emphasis on the benefit of using ammonium molybdate and of negative stain-trehalose combinations. Protocols are provided for the single droplet negative staining technique (on continuous and holey carbon support films), the floating a…

Characterization and Electrochemical Properties of Oxygenated Amorphous Carbon (a-C) Films

2016

Amorphous carbon (a-C) films with varying oxygen content were deposited by closed-field unbalanced magnetron sputtering with the aim to understand the effect of oxygen on the structural and physical properties of the films and subsequently correlate these changes with electrochemical properties. The a-C films were characterized by transmission electron microscopy, helium-ion microscopy, atomic force microscopy, Raman spectroscopy, X-ray photoelectron spectroscopy and time-of-flight elastic recoil detection analysis. The electrochemical properties were studied by electrochemical impedance spectroscopy and cyclic voltammetry with several redox systems (Ru(NH3)62+/3+, Fe(CN)64−/3−, dopamine an…

Deformation behavior and interfacial sliding in carbon/copper nanocomposite films deposited by high power DC magnetron sputtering

2015

Abstract Amorphous carbon–copper nanocomposite films with a carbon content from 7 to 40 at.% have been deposited onto steel, silicon and glass substrates using a high power (> 60 W/cm 2 ) and high-rate DC magnetron sputtering technique. XRD, Raman spectroscopy and TEM results confirm that the deposited films consist of copper nanograins (size

Structure and chemical bonds in reactively sputtered black Ti–C–N–O thin films

2011

The evolution of the nanoscale structure and the chemical bonds formed in Ti–C–N–O films grown by reactive sputtering were studied as a function of the composition of the reactive atmosphere by increasing the partial pressure of an O2+N2 gas mixture from 0 up to 0.4 Pa, while that of acetylene (carbon source) was constant. The amorphisation of the films observed by transmission electron microscopy was confirmed by micro- Raman spectroscopy, but it was not the only effect associated to the increase of the O2+N2 partial pressure. The chemical environment of titanium and carbon, analysed by X-ray photoemission spectroscopy, also changes due to the higher affinity of Ti towards oxygen and nitro…

Physical vapor deposition of Bi2S3 as absorber material in thin film photovoltaics

2013

Abstract In order to investigate alternative absorber materials for inorganic solar cells, thin films of bismuth trisulfide (Bi2S3) were deposited under high vacuum conditions by the thermal evaporation method from compound material. The effects of the substrate temperature during deposition on the structural, stoichiometric, optical and electrical properties were investigated. Polycrystalline thin films close to an ideal stoichiometry could be deposited for temperatures TSub = 80–290 °C; thereby a transition from rough needle-shaped particles with (hk0)-orientation parallel to the surface of the substrate towards block shaped grains with a preferred direction out of the surface could be ob…

Effect of Boron Doping on the Wear Behavior of the Growth and Nucleation Surfaces of Micro- and Nanocrystalline Diamond Films

2016

B-doped diamond has become the ultimate material for applications in the field of microelectromechanical systems (MEMS), which require both highly wear resistant and electrically conductive diamond films and microstructures. Despite the extensive research of the tribological properties of undoped diamond, to date there is very limited knowledge of the wear properties of highly B-doped diamond. Therefore, in this work a comprehensive investigation of the wear behavior of highly B-doped diamond is presented. Reciprocating sliding tests are performed on micro- and nanocrystalline diamond (MCD, NCD) films with varying B-doping levels and thicknesses. We demonstrate a linear dependency of the we…